| Top | |
|
|
|
| GtkWidget * | gtk_socket_new () |
| void | gtk_socket_steal () |
| void | gtk_socket_add_id () |
| GdkNativeWindow | gtk_socket_get_id () |
| GdkWindow * | gtk_socket_get_plug_window () |
GObject
╰── GInitiallyUnowned
╰── GtkObject
╰── GtkWidget
╰── GtkContainer
╰── GtkSocket
Together with GtkPlug, GtkSocket provides the ability to embed widgets from one process into another process in a fashion that is transparent to the user. One process creates a GtkSocket widget and passes that widget's window ID to the other process, which then creates a GtkPlug with that window ID. Any widgets contained in the GtkPlug then will appear inside the first application's window.
The socket's window ID is obtained by using
gtk_socket_get_id(). Before using this function,
the socket must have been realized, and for hence,
have been added to its parent.
Example 16. Obtaining the window ID of a socket.
1 2 3 4 5 6 7 8 9 10 |
GtkWidget *socket = gtk_socket_new (); gtk_widget_show (socket); gtk_container_add (GTK_CONTAINER (parent), socket); /* The following call is only necessary if one of * the ancestors of the socket is not yet visible. */ gtk_widget_realize (socket); g_print ("The ID of the sockets window is %#x\n", gtk_socket_get_id (socket)); |
Note that if you pass the window ID of the socket to another
process that will create a plug in the socket, you
must make sure that the socket widget is not destroyed
until that plug is created. Violating this rule will
cause unpredictable consequences, the most likely
consequence being that the plug will appear as a
separate toplevel window. You can check if the plug
has been created by using gtk_socket_get_plug_window(). If
it returns a non-NULL value, then the plug has been
successfully created inside of the socket.
When GTK+ is notified that the embedded window has been destroyed, then it will destroy the socket as well. You should always, therefore, be prepared for your sockets to be destroyed at any time when the main event loop is running. To prevent this from happening, you can connect to the “plug-removed” signal.
The communication between a GtkSocket and a GtkPlug follows the
XEmbedprotocol. This protocol has also been implemented in other toolkits, e.g.
Qt, allowing the same level of integrationwhen embedding a Qt widget in GTK or vice versa.
A socket can also be used to swallow arbitrary
pre-existing top-level windows using gtk_socket_steal(),
though the integration when this is done will not be as close
as between a GtkPlug and a GtkSocket.
void gtk_socket_steal (GtkSocket *socket_,GdkNativeWindow wid);
gtk_socket_steal is deprecated and should not be used in newly-written code.
Reparents a pre-existing toplevel window into a GtkSocket. This is meant to embed clients that do not know about embedding into a GtkSocket, however doing so is inherently unreliable, and using this function is not recommended.
The GtkSocket must have already be added into a toplevel window before you can make this call.
void gtk_socket_add_id (GtkSocket *socket_,GdkNativeWindow window_id);
Adds an XEMBED client, such as a GtkPlug, to the GtkSocket. The client may be in the same process or in a different process.
To embed a GtkPlug in a GtkSocket, you can either create the
GtkPlug with gtk_plug_new (0), call
gtk_plug_get_id() to get the window ID of the plug, and then pass that to the
gtk_socket_add_id(), or you can call gtk_socket_get_id() to get the
window ID for the socket, and call gtk_plug_new() passing in that
ID.
The GtkSocket must have already be added into a toplevel window before you can make this call.
GdkNativeWindow
gtk_socket_get_id (GtkSocket *socket_);
Gets the window ID of a GtkSocket widget, which can then
be used to create a client embedded inside the socket, for
instance with gtk_plug_new().
The GtkSocket must have already be added into a toplevel window before you can make this call.
“plug-added” signalvoid user_function (GtkSocket *socket_, gpointer user_data)
This signal is emitted when a client is successfully added to the socket.
socket_ |
the object which received the signal |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“plug-removed” signalgboolean user_function (GtkSocket *socket_, gpointer user_data)
This signal is emitted when a client is removed from the socket.
The default action is to destroy the GtkSocket widget, so if you
want to reuse it you must add a signal handler that returns TRUE.
socket_ |
the object which received the signal |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last